Westermo TD-23 Installationshandbuch PDF herunterladen (Seite 26)

26 6179-2203

S11 – DTMF Tone Duration

S11 operation is country dependent.

Range: 50–255 milliseconds

Default: 95 (95 milliseconds)

S12 – Escape Prompt Delay (EPD)

S12 defines the maximum period, in fiftieths of a second, allowed between receipt of the

last character of the three escape character sequence from the DTE and sending of the OK

result code to the DTE. If any characters are detected during this time, the OK will not be

sent. Note that sending of the OK result code does not affect entry into command mode.

Range: 0–255 1/50 of a second

Default: 50 (1 second)

S13 – Callback delay time

S13 defines the time between that the modem releses connection and dials a stored call-

back number.

Range: 0–255 seconds

Default: 10 (10 seconds)

S14 – General Bit Mapped Options Status

S14 indicates the status of command options.

Default: 138 (8Ah) (10001010b)

Bit 0 This bit is ignored.

Bit 1 Command echo (En)

0 = Disabled (E0)

1 = Enabled (E1) (Default)

Bit 2 Quiet mode (Qn)

0 = Send result codes (Q0) (Default)

1 = Do not send result codes (Q1)

Bit 3 Result codes (Vn)

0 = Numeric (V0)

1 = Verbose (V1) (Default)

Bit 4 Reserved

Bit 5 Tone (T)

0 = Tone (T) (Default)

Bit 6 Password (*Gn)

0 = Disabled (*G0) (Default)

1 = Enabled (*G1)

Bit 7 Originate/Answer

0 = Answer

1 = Originate (Default)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Keine Kommentare

Westermo TD-23 Installationshandbuch Seite 26