Westermo TD-23 Installationshandbuch PDF herunterladen (Seite 42)

42 6178-2203

S31 – Bit Mapped Option Status (Read only)

Bit Interval Default Description

0 – – Reserved

1 0..1 1 Automatic line setting:

0-ATN0

1-ATN1

2..3 0..2 1 Error correction messages:

0-Reports only speed on serial port

(ATW0)

1-Reports line speed and speed on

serial port (AT&W1)

2-Reports only line speed (ATW2)

4..7 – 0 Reserved

S32 – XON Character (Not stored with &W)

The register is used for setting the character that will be recognised as XON flow control character.

Default 17 {0..255} (ASCII decimal).

S33 – XOFF character (Not saved with &W)

The register is used for setting the character that will be recognised as XOFF flow control character.

Default 19 {0..255} (ASCII decimal).

S36 – LAP-M Failure Control

The register indicates what should happen upon V.42 LAPM connect failure.

0-The modem disconnects (AT\N4)

1-The modem stays on-line and a direct mode connection is established (AT\N1)

2-Reserved

3-The modem stays on-line and a normal mode connection is established (AT\N0)

4-An MNP-connection is attempted and if it fails, the modem disconnects (AT\N5)

5-An MNP-connection is attempted and if it fails, a direct mode connection is established.

6-Reserved

7- An MNP-connection is attempted and if it fails, a normal mode connection is established.

(AT\N3)

Default 7 {0..7}

Please also refer to S48, \N

S37 – Bit mapped register

Bit Interval Default Description

0..7 0..7 0 Selection of line modulation:

0-Selects automatic line

modulation (ATF0)

1..3-V.21 or Bell 103 mod (ATF1)

5-V.22 or Bell 212A mod (ATF4)

6-V.22bis mod (ATF5)

8-V.32bis/V.32 4 800 bit/s (ATF6)

9-V.32bis/V.32 9 600 bit/s (ATF8)

10-V.32bis 12 000 bit/s (ATF9).

11-V.32bis 14 400 bit/s (ATF10).

12-V.32bis 7 200 bit/s (ATF7).

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Westermo TD-23 Installationshandbuch Seite 42

Kommentare zu diesen Handbüchern