Westermo MRD-310 Betriebsanweisung

3G Cellular Modem / Routerwww.westermo.com©Westermo Teleindustri ABUser Guide6623-2201MRD-310

106623-2201Interface specificationsPowerRated voltage 10 to 60 VDCOperating voltage 10 to 60 VDCRated current (Max) 800 mAInrush current 1.0 APolarity

116623-2201ConnectionsEthernet TX Connections (RJ-45 connector) LAN1-2Position Direction Description1 In/Out TD+2 In/Out TD–3 In/Out RD+4 – Not Conne

126623-2201LED indicatorsLED Status DescriptionPower PWROFF ON (green)No power Unit readyNetwork indicator NETOFF Flashing (green) ON (green

136623-2201Signal Strength Indicator The Signal Strength Indicator reports the level of the received RF signal as well as any network connection fault

146623-2201Getting startedInstalling the SIM CardThe SIM card is accessed from the rear of the unit.To eject the SIM card drawer press the SIM card

156623-2201Figure 3Factory default reset switchFactory Default Reset SwitchThe reset switch is used to restore the configuration of the MRD-310 to fac

166623-2201Configuration Accessing and Using the Web Interface All configuration of the MRD-310 is performed via the web interface. In order to view t

176623-2201Windows PC Network SettingsThe following describes how to configure the network settings of a Windows XP PC so that it can access the MRD-3

186623-22016. The Internet Protocol (TCP/IP)Properties dialog box, change the settings to match those shown in figure 5, and then click ”OK.Figure 5 N

196623-2201• The Status summary page will be displayed, it will be similar to figure 6.Figure 6Note: If the unit is not yet configured it is likely th

26623-2201Legal informationThe contents of this document are provided ”as is”. Except as required by applicable law, no warranties of any kind, either

206623-2201Network ConfigurationThe ”Network Configuration”section contains the settings for the operational mode and the frequency band of the unit,

216623-2201Adding a Network Connection Profile To access the wireless packet mode settings click on the ”Packet mode'' tab. The screen shown

226623-2201Figure 10Note: In order to set a password click the check-box marked New. The password can now be entered in the text field. The password i

236623-2201Enable the Wireless ConnectionTo complete the configuration of the wireless connection, set the ”Connection state” to ”Always connect” and

246623-2201Configure the LAN interface and DHCP Server To access the configuration page for the LAN interface and DHCP Server, select ”Interfaces” fro

256623-2201Under the ”DHCP Server Configuration table”:• Set the ”Enabled” option to ”Yes”.• Enter the first address of the group in the ”Start Addr

266623-2201MountingMountingThe MRD-310 includes integrated mounting flanges and can be attached to a panel or tray by means of screws, using the slots

276623-2201DimensionsMeasurements are stated in millimeters.154±0,5124±0,533310,34,414,51032593,455142141,84R1,7

REV.F 6623-2201 2014-01 Westermo Teleindustri AB, Sweden – A Beijer Electronics Group CompanyFor complete contact information, please visit our w

36623-2201SafetyBefore using this unit:Read this manual completely and gather all information on the unit. Make sure that you understand it fully. Che

46623-2201GeneralRemember to follow any special regulations and warnings in force in any area and never use the unit whenever it is forbidden to use i

56623-2201For Vehicles equipped with an airbagAn air bag inflates with great force. DO NOT place objects, including either installed or portable wirel

66623-2201Type Approval / ComplianceEMC EN 61000-6-1 Immunity residential environmentsEN 61000-6-2 Immunity industrial environmentsEN 61000-6-3 Emi

76623-2201Declaration of Conformity Westermo Teleindustri AB Declaration of conformity Org.nr/ Postadress/Postal address Tel. Telefax Post

86623-2201Type tests and environmental conditionsPhenomena Test Description Test levelsESD EN 61000-4-2 Enclosure contact ± 4 kV (crit A)Enclosure ai

96623-2201DescriptionWireless 3G RouterThe MRD-310 is a robust 3G router designed to provide remote connectivity across wireless networks. The unit fe