
120 Supplementary Services commands
6615-2220
Command example Possible responses Note
AT+CCWA=1,1,1 OK Enable call waiting for voice
calls
AT+CCWA=1,2 +CCWA:1,1 Interrogate call waiting
OK Call waiting active for voice
calls
+CCWA:”0146290800”,145, Number and name of the
1,”FREDDY” waiting voice call
+CCWA:”0146290800”,145, Number and name of the
1,”8023459678FFFF” waiting voice call
(UCS2 format)
AT+CCWA=1,0,7 OK Erase call waiting
+CCWA:,,1 voice call waiting
(no number)
+CLIR – Calling line identification restriction
Description:
This command allows control of the calling line identification restriction supplementary
service.
Syntax:
AT+CLIR=<n>
Response syntax: (for AT+CLIR?)
+CLIR:<n>,<m>
Parameters:
<n>
Sets the line ID restriction for outgoing calls
0: Presentation indicator is used according to the subscription of the CLIR service
1: CLIR invocation
2: CLIR suppression
<m>
Shows the subscriber CLIR status in the network
0: CLIR not provisioned
1: CLIR provisioned in permanent mode
2: Unknown (no network...)
3: CLIR temporary mode presentation restricted
4: CLIR temporary mode presentation allowed
Command example Possible responses Note
AT+CLIR=2 OK Set command
Kommentare zu diesen Handbüchern