©Westermo Teleindustri ABIndustrial Ethernet Extenderwww.westermo.comUser Guide6642-22511WeOSWolverine DDW-142-485
106642-22511Ethernet TX Electrical specification IEEE std 802.3. 2005 EditionData rate 10 Mbit/s, 100 Mbit/s, manual or autoDuplex Full or half, manua
116642-22511I/O / Relay output Maximum voltage/current 60 VDC / 80 mAConnect resistance Max 30 ΩIsolation to All otherConnection Detachable screw ter
126642-22511Location of interface ports and LED’sLED Indicators (for details see page 15)RS-422/485 (for details see page 9 and 14)I/O connection
136642-22511DDW-142-485 is equipped with internal termination that is configurable through software in RS-422/485 mode. The following termination sch
146642-22511I/O connection12344-position Product marking Direction DescriptionNo. 1 Status + Output Alarm relay (status) contactNo. 2 Status – Output
156642-22511LED indicatorsLED Status DescriptionON OFF Unit has no power.GREEN All OK, no alarm condition.REDAlarm condition, or until unit has starte
166642-22511MountingThis unit should be mounted on 35 mm DIN-rail, which is horizontally mounted inside an apparatus cabinet or similar. It is recomme
176642-22511ConfigurationConfigure the unit via web browser The unit can easily be configured via a web browser. Open the link http://192.168.2.200 in
186642-22511Cable factory reset on DDW-142-485It is possible to set the unit to factory default settings by using a standard Ethernet RJ-45 cable.1.
196642-22511DimensionsMeasurements are stated in millimeters.92±1Min 4mmMax 7,5mm34±196±152±1100±1
26642-22511License InformationThis device contains public available software which is under the GPL license.For more information see legal.pdf include
REV. C 6642-22511 2015-03 Westermo Teleindustri AB, Sweden – A Beijer Electronics Group CompanyFor complete contact information, please visit our
36642-22511SafetyBefore installation:Read this manual completely and gather all information on the unit. Make sure that you understand it fully. Check
46642-22511Agency approvals and standards complianceType Approval / ComplianceEMC EN 50121-4, Railway signalling and telecommunications apparatusEN 55
56642-22511Declaration of Conformity Westermo Teleindustri AB Declaration of conformity Org.nr/ Postadress/Postal address Tel. Telefax Pos
66642-22511Type tests and environmental conditionsElectromagnetic CompatibilityEnvironmental phenomenaBasic standardDescription Test levelsElectrost
76642-22511Electromagnetic CompatibilityEnvironmental phenomenaBasic standardDescription Test levelsDielectric strength EN 60950-1 Power port to oth
86642-22511DescriptionFunctional descriptionThe Wolverine DDW-142-485 allows effec tive Ethernet networks to be created over long distances up to 15 k
96642-22511Interface specificationsPower Rated voltage 24 to 48 VDCOperating voltage 19 to 60 VDCRated current 245 mA (405 mA) @ 24 VDC (with 500 mA U
Kommentare zu diesen Handbüchern